Sizing

To perform at your best, it is essential you have the correct size frame to fit your inline boot. When frames are fitted to the boot, the frame must be anchored to the tip of the boot, regardless of the skating discipline. This ensures the rocker is slightly rearwards of the ball of the boot, enhancing comfort, balance and performance.

There can be a large discrepancy in the general sizing and quality of skating boots. Generally, we recommend the EDEA and Risport range as they provide superior control for the ankle support and the sizing is an accurate representation for the boot. If you are unsure of the size of your boot, the safest way is to measure the sole of your boot and compare to the available frame sizes. We recommend at least 10mm reduction to allow the frame to fit comfortably under the boot, however a 5mm reduction may be preferred.

To determine the correct frame size for your boot, please refer to the following Sizing Chart or download the following Sizing Guide:

Size	Frame Length
Small	230 mm
Medium	245 mm
Large	260 mm
For correct fitting to boots, measure the total length of the base of the boot and deduct 10mm. This gives the frame clearance to fit nicely under the boot.
Custom Inlines Sizing Guide (341kb PDF)

Boot Recommendations

We recommend the EDEA and RISPORT range of boots as suitable for V2 frames.

Mounting Instructions

For detailed mounting instructions for the V1 and V2 frame, please download the following Mounting Instructions guide.

Custom Inlines V1/V2 Mounting Instructions (63kb PDF)